Preparation and antimicrobial properties of LL‐37 peptide immobilized lignin/caprolactone polymer film

The use of biopolymers has gained priority in tissue engineering and biotechnology, both as dressing material and for enhancing treatment efficiency. There is a demand for new biopolymers designed with protease inhibitors and antimicrobials. LL‐37 is an important antimicrobial peptide in human skin and exhibits a broad spectrum of antimicrobial activity against bacteria, fungi, and viral pathogens. Using lignin which is an abundant carbohydrate polymer in nature and a polyacrylic acid, we prepared a lignin/caprolactone biodegradable film by plastifying caprolactone and polyacyrlic acid. Lignin/caprolactone biodegradable film was activated with CDI and then immobilized LL‐37 peptide. The structure was elucidated in terms of its functional groups by attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), and the morphology of the lignin/caprolactone biodegradable film was characterized by scanning electron microscopy (SEM) before and after the immobilization process. The amount of LL‐37 immobilized was determined by ELISA method. It was found that 97% of LL‐37 peptide was successfully immobilized onto the lignin/caprolactone biodegradable film. Antimicrobial activity was determined in the lignin/caprolactone biodegradable film samples by quantitative antimicrobial activity method. According to the results, LL‐37 immobilized lignin/caprolactone biodegradable film samples were effective on test organisms; Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli. In bio‐compatibility assays, the ability to support tissue cell integration was detected by using 3 T3 mouse fibroblasts. Samples were examined under transverse microscope, non‐immobilized sample showed a huge cellular death, whereas LL‐37 immobilized lignin/caprolactone biodegradable film had identical cellular growth with the control group. This dual functional lignin/caprolactone biodegradable film with enhanced antibacterial properties and increased tissue cell compatibility may be used to design new materials for various types of biological applications.     

Gold(I)‐Catalyzed Cycloisomerization of 3‐Alkoxyl‐1,6‐diynes: A Facile Access to Bicyclo[2.2.1]hept‐5‐en‐2‐ones

A novel gold‐catalyzed cycloisomerization of 1,6‐diynes was achieved, providing an atom‐economic approach to a diverse set of bicyclo[2.2.1]hept‐5‐en‐2‐ones in moderate to good yields. With unsymmetrical starting materials with two different internal alkynyl substituents, to some extent, the regioselectivity could be controlled by both electronic and steric factors. This unprecedented reactivity pattern may inspire new and unconventional strategies for the preparation of bridged ring systems.     

Development of a stir bar sorptive extraction method coupled to solidification of floating droplets dispersive liquid–liquid microextraction based on deep eutectic solvents for the extraction of acidic pesticides from tomato samples

A stir bar sorptive extraction method coupled with deep eutectic solvent based solidification of floating organic droplets–dispersive liquid–liquid microextraction has been used for the simultaneous derivatization and extraction of some acidic pesticides in tomato samples. In this method, initially the analytes are adsorbed on a coated stir bar from tomato juice filled in a narrow tube. After extraction, the stir bar is removed and a water–miscible deep eutectic solvent is used to elute the analytes. Afterward, a derivatization agent and a water–immiscible deep eutectic solvent (as an extraction solvent) with melting point near to room temperature are added to the obtained eluant at µL–levels and the obtained mixture is rapidly injected into deionized water. Under the optimum conditions, the introduced method indicated high enhancement (1543–3353) and enrichment (2530–2999) factors, low limits of detection (7–14 ng/L) and quantification (23–47 ng/L), good linearity (r² ≥ 0.9982), and satisfactory repeatabilities (relative standard deviation ≤12% for intra– and inter–day precisions at a concentration of 100 ng/L of each analyte). Finally, the proposed method was applied in analysis of the analytes in tomato samples.     

Fast and efficient immunoaffinity column cleanup and liquid chromatography–tandem mass spectrometry method for the quantitative analysis of aflatoxins in baby food and feeds

An ultra high performance liquid chromatography‐tandem mass spectrometric method has been developed for the highly sensitive and selective determination of regulated aflatoxins. The extraction of aflatoxins from baby food matrices were performed using liquid–liquid extraction procedure followed by immunoaffinity column cleanup. The higher sensitivity for the determination of target aflatoxins was fulfilled by applying a preconcentration step with immunoaffinity columns after acetonitrile–water extraction. The enhanced selectivity was attained with the triple quadrupole mass analyzer operated in electrospray positive ionization mode. Method validation was tested in five different baby food matrices by recovery experiments. Satisfactory recoveries, between 92 and 103%, with relative standard deviations lower than 8% were achieved in all the tested matrices. The proposed method was found to be specific as no interference peaks were observed for blank samples. The limit of detection of the method was found to be in the range of 0.003–0.008 ng/mL. The validated method was fruitfully applied to the screening of aflatoxins in baby foods and feeds sample retailed in local markets of Riyadh, Saudi Arabia. The obtained levels of all analyzed aflatoxins were below the regulation limits set by European Agency.     

A three‐phase solvent extraction system combined with deep eutectic solvent‐based dispersive liquid–liquid microextraction for extraction of some organochlorine pesticides in cocoa samples prior to gas chromatography with electron capture detection

A sample pretreatment method based on the combination of a three‐phase solvent extraction system and deep eutectic solvent‐based dispersive liquid–liquid microextraction has been introduced for the extraction of four organochlorine pesticides in cocoa samples before their determination by gas chromatography‐electron capture detection. A mixture of sodium chloride, acetonitrile, and potassium hydroxide solution is added to cocoa bean or powder. After vortexing and centrifugation of the mixture, the collected upper phase (acetonitrile) is removed and mixed with a few microliters of N,N‐diethanol ammonium chloride: pivalic acid deep eutectic solvent. Then it is rapidly injected into deionized water and a cloudy solution is obtained. Under optimum conditions, the limits of detection and quantification were found to be 0.011‐0.031 and 0.036‐0.104 ng/g, respectively. The obtained extraction recoveries varied between 74 and 92%. Also, intra‐ (n = 6) and interday (n = 4) precisions were less than or equal to 7.1% for the studied pesticides at a concentration of 0.3 ng/g of each analyte. The suggested method was applied to determine the studied organochlorine pesticide residues in various cocoa powders and beans gathered from groceries in Tabriz city (Iran) and aldrin and dichlobenil were found in some of them.     

A superspace formulation of the BV action for higher derivative theories

We first analyse the anti-BRST and double BRST structures of a certain higher derivative theory that has been known to possess BRST symmetry associated with its higher derivative structure. We discuss the invariance of this theory under shift symmetry in the Batalin–Vilkovisky (BV) formalism. We show that the action for this theory can be written in a manifestly extended BRST invariant manner in superspace formalism using one Grassmann coordinate. It can also be written in a manifestly extended BRST invariant manner and on-shell manifestly extended anti-BRST invariant manner in superspace formalism using two Grassmann coordinates.     

A Silver Bite: Crystalline Heterometallic Architectures Based on Ag–π Interactions with a Bis‐Dipyrrin Zinc Helicate

An unprecedented mode of assembly of helical motives and Ag^I ions in the crystalline state is described. The combination of a Zn^II helicate based on a 2,2′‐bisdpm bearing peripheral benzonitrile moieties with AgX salts, leads to the formation of a tetranuclear core containing Ag–π interactions. Depending on the coordinating ability of the X^? anion and the solvents used, the tetranuclear complex self‐assembles into coordination polymers of varying dimensionality. From the sequence of coordination events (Ag–π or Ag–peripheral site), one may envisage two possible construction scenarios. However, the Ag–π as primary event seems reasonable owing to the rather weak binding propensity of the nitrile group and the chelating nature of the π‐clefts.     

Miniaturization of GPS patch antennas based on novel dielectric ceramics Zn(1−x)MgxAl2O4 by sol–gel method

The need for miniaturization and weight reduction of GPS patch antennas has prompted the search for new microwave dielectric materials. In this study, a sol–gel method was used to prepare Zn_(1?x)Mg_xAl₂O₄ thin films and fabricate GPS patch antennas at a low annealing temperature (700 °C). X-ray diffraction (XRD) patterns, field emission scanning electron microscopy images, Fourier transform infrared spectra, and optical band gap analyses confirmed the nanostructure of (Mg/Zn)Al₂O₄. The XRD patterns displayed the characteristic peaks of (Mg/Zn)Al₂O₄ with a face-centered cubic structure. Mg addition decreased the crystallite size, surface morphology, and lattice parameters of the resultant films, evidently affecting their density and dielectric constant (? _r ). Based on the material investigated and microwave antenna theory, GPS patch antennas were fabricated using Zn_(1?x)Mg_xAl₂O₄ and then studied using a PNA series network analyzer. The fabricated patch antennas with different ? _r ceramics decreased in size from 12.5 to 10.8 cm². The patch antennas resonated at a frequency of 1.570 GHz and provided a return loss bandwidth between ?16.6 and ?20.0 dB; their bandwidth also improved from 90 to 255 MHz. The GPS patch antenna fabricated from Zn_0.70Mg_0.30Al₂O₄ showed an excellent combination of return loss (?20.0 dB), small size (10.8 cm²), and wide bandwidth (255 MHz). Therefore, addition of Mg improves antenna performance and decreases the dimensions of the device.     

Effects of Magnetic Nanofluid Fuel Combustion on the Performance and Emission Characteristics

Although the compression ignition engines are a significant source of power, their detrimental emissions create considerable problems to the environment as well as to humans. The objective of the present experimental investigation is to examine the effects of the magnetic nanofluid fuels on combustion performance characteristics and exhaust emissions. In this regard, the Fe₃O₄ nanoparticles dispersed in the diesel fuel with the nanoparticle concentrations of 0.4 and 0.8 vol% were employed for combustion in a single-cylinder, direct-injection diesel engine. After a series of experiments, it was demonstrated that the nanoparticle additives, even at very low concentrations, have considerable influence in diesel engine characteristics. Furthermore, the results indicated that the nanofluid fuel with nanoparticle concentration of 0.4 vol% shows better combustion characteristics in comparison with that of 0.8 vol%. Based on the experimental results, NO _x and SO₂ emissions dramatically reduce, while CO emissions and smoke opacity noticeably increase with increasing the dosing level of nanoparticles.     

Electrospun copper oxide nanoparticles as an efficient heterogeneous catalyst for N-arylation of indole

The N-arylation of indoles with a variety of aryl bromides is reported using copper oxide nanoparticles as a heterogeneous catalyst. These copper oxide nanoparticles, which were produced in a novel, facile, and scalable fashion via an electrospinning technique, resulted in an excellent product yield under mild conditions. Moreover, the catalyst was easily recovered and reused several times without significant loss of activity.